Press/กด CtrlหรือCmd + P to print
or save as PDF

การออกแบบและติดตั้งระบบผลิตพลังงานไฟฟ้าโดยใช้โซล่าเซลล์แบบออฟกริด

Last modified: January 11, 2020
You are here:
Estimated reading time: 1 min
ชื่อโครงงาน:
Project Title:
การออกแบบและติดตั้งระบบผลิตพลังงานไฟฟ้าโดยใช้โซล่าเซลล์แบบออฟกริด
Design and installation of off-grid solar cell system
ชื่อนักศึกษา:
Author:
นายเมธานันท์ อมรพิพัฒนานนท์, นางสาวอมรรัตน์ พินิจเวชการ

Mr. Methanan Amornpipattananon, Ms. Amonrat Pinitwatchakarn

อาจารย์ที่ปรึกษา:
Advisor:
ผู้ช่วยศาสตราจารย์ ดร.ยงยุทธ นาราษฏร์
Asst. Prof. Dr. Yongyuth Naras
ระดับการศึกษา:
Degree:
วิศวกรรมศาสตรบัณฑิต (วศ.บ.)
Bachelor of Engineering
ภาควิชา:
Major:
วิศวกรรมไฟฟ้า
Electrical Engineering
คณะ:
Faculty:
วิศวกรรมศาสตร์
Engineering
ภาคการศึกษา/ปีการศึกษา:
Semester / Academic year:
3/2560
3/2017

การอ้างอิง/citation

เมธานันท์ อมรพิพัฒนานนท์, อมรรัตน์ พินิจเวชการ. (2560). การออกแบบและติดตั้งระบบผลิตพลังงานไฟฟ้าโดยใช้โซล่าเซลล์แบบออฟกริด. (สหกิจศึกษา). กรุงเทพฯ: วิศวกรรมศาสตร์ มหาวิทยาลัยสยาม.


บทคัดย่อ

รายงานสหกิจศึกษานี้นำเสนอประสบการณ์ที่เป็นประโยชน์เกี่ยวกับการออกแบบและติดตั้งระบบผลิตพลังงานไฟฟ้าโดยใช้โซล่าเซลล์แบบออฟกริดหรือแบบอิสระ ซึ่งได้ทำการศึกษาและปฏิบัติงาน ณ บริษัท นิวเพาเวอร์ ซิสเท็ม จำกัด หลักการทำงานของส่วนประกอบที่ต้องการใช้งานสำหรับระบบ เช่น แผงโซล่าเซลล์  แบตเตอรี่ โซล่าร์ชาร์จเจอร์ และ อินเวอร์เตอร์ ถูกนำเสนอไว้อย่างละเอียดเป็นลำดับแรก กระบวนการออกแบบได้แก่ การคำนวณโหลด การคำนวณความต้องการกำลังไฟฟ้า การคำนวณค่าพิกัดโวลต์-แอมป์ของโซล่าชาร์จเจอร์ การคำนวณค่าพิกัดแอมป์-ชั่วโมงของแบตเตอรี่ การคำนวณค่าพิกัดกำลังของอินเวอร์เตอร์ การคำนวณค่าพิกัดกำลังของโซล่าเซลล์ และการคำนวณหาจำนวนของแผงโซล่าเซลล์ ตลอดจนการจัดทำรายการวัสดุได้ถูกอธิบายไว้อย่างเป็นระบบ จากนั้น กระบวนการติดตั้งระบบถูกนำเสนอ ในตอนท้าย การตั้งค่าส่วนแสดงผลข้อมูลของระบบโดยใช้เทคโนโลยีอีเธอร์เน็ตซึ่งจัดให้มีการจัดเก็บข้อมูลและการเชื่อมต่อคอมพิวเตอร์ผ่านการเชื่อมต่อเครือข่ายถูกนำเสนอไว้ในรายงานนี้

คำสำคัญ: โซล่าเซลล์, พลังงานแสงอาทิตย์, ระบบอิสระ, โซล่าชาร์จเจอร์


Abstract

This cooperative education report presents useful experiences on the design and installation of an off-grid or a stand-alone solar cell system, which are studied and practiced at the New Power Systems Company Limited, during the cooperative education program of Siam University. Operating principles of the required components using for the system such as  solar panel,  battery,  solar charger and inverter are first discussed in detail.  Design procedures of the system including estimation, power demand computation, solar charger volt-amp rating computation, battery ampere-hour rating computation, inverter power rating computation, solar cell power rating computation and calculating a number of solar panels as well as creating a bill of materials are described systematically. Then, the installation procedures of the system are  described. Finally, setting up of the system data monitoring component based on Ethernet technology that provides data storage and computer interface over a network connection is presented in this report.

Keywords:  Solar cells, Solar energy, Off-Grid system, Solar charger.


  การออกแบบและติดตั้งระบบผลิตพลังงานไฟฟ้าโดยใช้โซล่าเซลล์แบบออฟกริด / Design and installation of off-grid solar cell system

คณะวิศวกรรมศาสตร์ มหาวิทยาลัยสยาม  |  Faculty of Engineering, Siam University, Bangkok, Thailand