The Mechanical Properties for Using Banana’s Peel Ash as Aggregate in Geopolymer Mortar

Citation

Kamsuwan, T. (2022). The mechanical properties for using Banana’s Peel ash as aggregate in geopolymer mortar. In Casini, M. (eds) Proceedings of the 2nd International Civil Engineering and Architecture Conference. CEAC 2022 (pp. 70-76). Lecture Notes in Civil Engineering, vol 279. Singapore: Springer. https://doi.org/10.1007/978-981-19-4293-8_8

ABSTRACT

Geopolymer is a new alternative material for construction that does not contain cement and produces very little CO2. Geopolymer was caused by the reaction of geopolymerization of high concentrations of alkali substances and oxides of silicon and aluminum that can transformed into a strong structural material. Therefore, it is an alternative material that can be used to replace cement. When mixed with charcoal powder of banana peel which is waste in agricultural products form banana plants. This study is mixing with geopolymer with charcoal powder banana peel at 0, 5, 10, and 15% by weight for testing a

mechanical property. We used a ratio for fly ash 50% and the mixed with solution 1 part sodium silicate and 1 part of 12 molar sodium hydroxide into 50% by total weight. Last process, we mixed geopolymer part with river sand that passing through sieve no.16 in ratio of geopolymer 1 part per river sand 2 part by weight. Also, we were tested the mechanical properties and testing both powder with scanning electron microscope (SEM) and Energy Dispersive X-Ray Analysis (EDS). We found that charcoal powder banana peel mixed with geopolymer can improved the efficiency of compression and flexural strength and water absorption in an appropriate ratio

Keywords: Geopolymer, Cement, banana peel, fly ash, Construction

Link to Publication

The Mechanical Properties for Using Banana’s Peel Ash as Aggregate in Geopolymer Mortar

คณะวิศวกรรมศาสตร์ มหาวิทยาลัยสยาม | Faculty of Engineering, Siam University, Bangkok, Thailand